Your cart is empty
Browse OfferingsLicensed & Affiliated
Ethio Coffee Import and Export PLC is a family-owned Ethiopian coffee exporter shipping green coffee beans to roasters, importers, and distributors worldwide.
© 2026 Ethio Coffee Import and Export PLC. All rights reserved.
How buyers can verify storage history and mill readiness for a washed Ethiopian lot.

A washed Ethiopian lot can cup clean while most of the coffee is still waiting in parchment. Before you commit it to a seasonal release, ask when drying ended, where the lot was held, and when the mill can confirm the finished coffee. Those three answers tell you what the seller can promise while parchment resting is still underway.
Parchment resting is the period when dried coffee is held in its papery shell before dry milling. Buyers should ask for the drying completion date, storage and transfer history, and recent checks for each portion of the lot. Tie the milling date to an updated condition check and confirm the commercial commitment against the finished green lot.
Parchment resting begins when a dried batch is cleared for storage with its protective shell still attached. The hold gives the processor time to let moisture stabilize and check the lot before hulling. The buyer can use that window to reserve coffee and agree what evidence will support a milling decision.
The International Trade Centre describes a 15- to 60-day resting period in its 2021 fourth edition of The Coffee Guide. Treat that range as trade context. Ask the seller what window applies to the specific batch and what the quality team will measure before clearing it. If drying finished on different days, ask for the dates behind the station lot instead of counting from the first bag packed.
Ethiopian station records can distinguish a drying-bed transfer from the date parchment enters storage. Thompson Owen's December 2009 field visit, published by Sweet Maria's in 2019, documents movable screens at Koke and parchment being taken off screens at an intermediate moisture stage. At Konga, Owen also documented staff covering coffee in the middle of the day to control drying. Ask what an “off bed” date means in the station's process and get the actual storage intake date for the coffee in your offer. Sweet Maria's Ethiopia harvest field report.
Ask the exporter for a dated record connecting the washing-station batches to the parchment held for your order. Trace the coffee through each store or transfer, then identify the quantity and location that the next check will cover. This matters when a station holds several drying batches under a shared offer name.
| Record | What to capture |
|---|---|
| Batch identity | Station, crop, internal batch code, bag count and net parchment kilograms. |
| Start of hold | Drying completion and storage intake dates, initial readings and the material tested. |
| Storage history | Store and stack reference, bag and liner type, transfer dates, and any damage, rebagging or exposure. |
| Quality checks | Check dates, bags or zones sampled, method, readings by group, and the person deciding what happens next. |
| Mill intake | Expected intake date, mill reference, earmarked quantity, and batches the mill is cleared to run together. |
In a 2024 Ethiopian study, Eshete and colleagues stored washed Limu, Sidama and Yirgacheffe parchment lots for twelve months under ambient conditions. The authors found that storage packaging influenced moisture stability and retention of quality in the tested lots. The trial gives buyers a reason to ask how parchment was stored and packed during the hold. Its setup was an extended storage experiment, so use the lot's own condition records to choose a mill date. Eshete et al., Heliyon, 2024.
Ask for a record at each change of custody. If parchment has moved from a station store to a mill intake warehouse, the new operator should know which bags came in under which batch codes and whether their condition changed. The Ethiopian washing station guide explains how station records establish the earlier part of that chain.
The mill should confirm lot identity and inspect the condition of the parchment it will actually run. Ask for readings that cover the batch groups in your reservation and request a dated quality decision for any group the operator is holding back.
Log whether the test was run with the parchment shell intact or on a hulled subsample. Record the meter mode, sample temperature if relevant to the method, sampling date and result. Check that the instrument and method are suitable for the material and that the reported value matches the agreed basis. Record water activity separately if your program uses it.
Ask for separate checks on later-packed or suspect bags before pooling readings. A composite may give the overall condition of the batch it represents, while the individual checks show where to investigate. Confirm the acceptance rule and sampling scope with the mill before the operator draws the samples.
If a stack shows damp packaging, an unusual smell, or a reading outside the agreed criterion, set its bags aside and record who will assess them. Ask the operator for a new inspection after a warehouse move or a storage incident, with the affected bags identified in the record. Milling should proceed on the cleared scope only, with any shared handling and traceability impacts resolved first.
When the history is incomplete but the coffee remains under consideration, ask whether the mill can prepare a small, identified trial from the intended batch. Review hulling condition and cup results before authorizing the bulk run, then retain the trial ID and the planned production batch scope. Use the Ethiopian coffee dry milling guide to specify the finished preparation you expect.
Record the parchment weight available and the finished green weight required as separate quantities. Estimate the latter from a representative preparation trial, then confirm it with the mill after hulling and final sorting. A lot can stay within its planned storage window and still fall short at the requested grade.
Give the exporter a date for the final quantity decision and a way to handle a shortfall. For a named-station release, specify whether an approved short run is acceptable and who can authorize adding another batch. Reserve time for the finished lot to be sampled and assessed before the roastery makes a public commitment. Record the identifier of the sample and the finished lot it represents in your Ethiopian coffee sample approval record.
Confirm whether the milling slot is firm or provisional. If the slot moves, get a new intake date and decide when the current condition checks need updating. Carry the same batch references through the schedule change so the operator can distinguish the booked coffee from any extra parchment offered to fill the order.
In this fictional example, a specialty roaster wants 600 kg of finished green Sidama from one washing station. The exporter identifies 820 kg of parchment in two tagged batches that completed drying on January 12 and January 19, 2026. The older 500 kg batch and the newer 320 kg batch remain separately identifiable in the station store.
A small trial from the older batch yields 77% finished green at the buyer's preparation. At that observed rate, 500 kg would give about 385 kg. Applying the same rate to all 820 kg for planning gives roughly 631 kg, a margin of only 31 kg above the request. The buyer records the 631 kg as a provisional estimate because the newer batch has yet to be checked and the trial may differ from the bulk run.
If a follow-up check places the newer batch on hold, approximately 385 kg remains in the plan and the expected shortfall is 215 kg. The buyer and exporter set a decision date for clearing that batch or agreeing a smaller run. The roaster keeps the launch quantity provisional until the final preparation and sample are accepted. The useful commercial measure is the margin backed by cleared material, with every held batch visible as a separate dependency.
For parchment resting, require a record that ties drying completion, storage history, current quality checks and the intended mill run to the same coffee. Confirm how much finished green the order needs and which conditions must be met before the buyer commits to that quantity.
Send the exporter the station or lot reference, green weight requirement, requested preparation, and the date you need the finished sample. Ask who will report a change in status. That gives the station, exporter, and mill a shared record to update when a batch is held or a milling slot moves.
The International Trade Centre's 2021 guide describes 15 to 60 days as a trade practice. Set the review date for the named batch with the exporter and mill. Count from confirmed drying completion, then check storage history and moisture readings before deciding when to run the coffee.
Yes, if the buyer has agreed to the lot composition and the mill has cleared each batch for the same run. Keep the earlier and later batch codes visible through intake. Record how much of each batch went into the run and link the result to the finished green lot.
Ask for the dispatch and intake dates, the old and new storage references, and the affected bag count and net weight. Confirm who inspected the bags at the new location. Request a condition recheck if there was a gap in custody, damaged packaging, or possible moisture exposure during the move.
A trial gives a provisional yield for the batch and the preparation tested. Use it to estimate the volume and decide whether the reservation has enough margin. Ask the mill for actual saleable green weight after bulk preparation and link that result to the finished lot and its sample.
Tell Ethio Coffee which origin, finished green quantity, and sample date you need. Ask about the lot's preparation stage and the timing of the next sample.